Alexei "Alyosha" A. Efros (born 9 April 1975) is a Russian-American computer scientist and professor at University of California, Berkeley. He has contributed to the field of computer vision, and his work has been referenced in Wired, BBC News, The New York Times, and The New Yorker. == Early life and education == Efros was born in St. Petersburg in the Soviet Union. His father is Alexei L. Efros, then a physics professor at the Ioffe Physico-Technical Institute. His family emigrated to the United States when he was 14 to accommodate his father's career and the family settled in Salt Lake City in 1991. He graduated from the University of Utah in 1997, and attended University of California, Berkeley for his PhD, where he was advised by Jitendra Malik and graduated in 2003. He then spent a year as a research fellow at the University of Oxford, where he worked with Andrew Zisserman. == Career == Efros joined the faculty at Carnegie Mellon University in Pittsburgh, where he remained until 2013 when he joined the faculty of the University of California, Berkeley. He received a Guggenheim Fellowship in 2008. He received the 2016 ACM Prize in Computing.
Fabric Connect
Fabric Connect, in computer networking usage, is the name used by Extreme Networks to market an extended implementation of the IEEE 802.1aq and IEEE 802.1ah-2008 standards. The Fabric Connect technology was originally developed by the Enterprise Solutions R&D department within Nortel Networks. In 2009, Avaya, Inc acquired Nortel Networks Enterprise Business Solutions; this transaction included the Fabric Connect intellectual property together with all of the Ethernet Switching platforms that supported it. Subsequently, the Fabric Connect technology became part of the Extreme Networks portfolio by virtue of their 2017 purchase of the Avaya Networking business and assets. It was during the Avaya era that this technology was promoted as the lead element of the Virtual Enterprise Network Architecture (VENA). == Technologies == === Fabric Connect === Fabric Connect's provides network-wide, end-to-end, multi-layer virtualization. A network virtualization capability, based on an enhanced implementation of the IEEE 802.1aq Shortest Path Bridging (SPB) standard, Fabric Connect offers the ability to create a simplified network that can dynamically virtualize elements to efficiently provision and utilize resources, thus reducing the strain on the network and personnel. Extreme Networks base the Fabric Connect technology on the SPB standard, including support for RFC 6329, and have integrated IP Routing and IP Multicast support; this unified technology allows for the replacement of multiple conventional protocols such as Spanning Tree, RIP and/or OSPF, ECMP, and PIM. === Fabric Attach === An adjunct to the Fabric Connect technology, Fabric Attach allows network operators to extend network virtualization directly into conventional wiring closets (using existing non-Fabric Ethernet switches) and automate the provisioning of devices to their appropriate virtual network. This is particularly relevant for the mass of unattended network end-point that are now appearing, such as IP Phones, Wireless Access Points, and IP Cameras. Fabric Attach standardized protocols such as 802.1AB LLDP to exchange credentials and obtain provisioning information that allows "Client" Switches to be automatically re-configured on the fly with parameters that let Traffic Flows Map through to Fabric Connect Edge Switches (aka "Backbone Edge Bridge" in SPB definition) functioning as a Fabric Attach "Server" Switch. This method is described by an IETF "Internet Draft", pending further standardization activity. Fabric Attach is typically used to automate Wiring Closet connectivity, but has the potential to be extensible for use in the Data Center, with Virtual Machines being able to dynamically request VLAN/VSN (Virtual Service Network) assignment based upon application requirements. == Hardware products == === Virtual Services Platform 9000 Series === A range of modular chassis-based products, featuring a carrier-grade Linux operation system, and designed for high-performance deployment scenarios that need to scale to multiple terabits of switching capacity and support 10 and 40 gigabit Ethernet connections, and is designed eventually to support 100 gigabit Ethernet. === Virtual Services Platform 8000 Series === A compact form-factor platform delivering high-density 10/40 gigabit Ethernet connectivity, and targeted at mid-market through to mid-size enterprise core switch applications. === Virtual Services Platform 7000 Series === A range of high-end 10 gigabit Ethernet stackable switches that extend fabric-based networking to the data center top-of-rack. They support 40 gigabit Ethernet via the MDA Slot. === Virtual Services Platform 4000 Series === A range of high-end gigabit Ethernet stackable switches that extend Fabric-based networking to branch and metro locations. === Ethernet Routing Switch 5000 Series === A range of high-end gigabit Ethernet stackable switches that provides enterprise-class desktop features, including PoE, and offers 10 Gbit/s uplink connections. Each Switch supports up to 144 Gbit/s of virtual backplane capacity, delivering up to 1.152 Tbit/s for a system of eight, creating a virtual backplane through a stacking configuration. === Ethernet Routing Switch 4000 Series === A range of gigabit Ethernet stackable switches that provide enterprise-class desktop features, including PoE/PoE+, and offer 1/10 Gbit/s uplink connections. Each switch supports up to 48 Gbit/s of virtual backplane capacity, delivering up to 384 Gbit/s for a system of 8, creating a virtual backplane through a stacking configuration. === Ethernet Routing Switch 3500 Series === These entry-level gigabit Ethernet stackable switches provide enterprise-class desktop features, including PoE/PoE+, and 1 Gbit/s uplink connections.
Metadata
Metadata (or metainformation) is data (or information) that defines and describes the characteristics of other data. It often helps to describe, explain, locate, or otherwise make data easier to retrieve, use, or manage. For example, the title, author, and publication date of a book are metadata about the book. But, while a data asset is finite, its metadata is infinite. As such, efforts to define, classify types, or structure metadata are expressed as examples in the context of its use. The term "metadata" has a history dating to the 1960s where it occurred in computer science and in popular culture. Different types of metadata serve different functions. For example, descriptive metadata for a document might include the author, creation date, file size and keywords. Metadata has various purposes. It can help users find relevant information and discover resources. It can also help organize electronic resources, provide digital identification, and archive and preserve resources. Metadata allows users to access resources by "allowing resources to be found by relevant criteria, identifying resources, bringing similar resources together, distinguishing dissimilar resources, and giving location information". Metadata of telecommunication activities including Internet traffic is very widely collected by various national governmental organizations. This data is used for the purposes of traffic analysis and can be used for mass surveillance. Unique metadata standards exist for different disciplines (e.g., museum collections, digital audio files, websites, etc.). Describing the contents and context of data or data files increases its usefulness. For example, a web page may include metadata specifying what software language the page is written in (e.g., HTML), what tools were used to create it, what subjects the page is about, and where to find more information about the subject. This metadata can automatically improve the reader's experience and make it easier for users to find the web page online. A CD may include metadata providing information about the musicians, singers, and songwriters whose work appears on the disc. In many countries, government organizations routinely store metadata about emails, telephone calls, web pages, video traffic, IP connections, and cell phone locations. == Types == There are many distinct types of metadata, including: Descriptive metadata – the descriptive information about a resource. It is used for discovery and identification. It includes elements such as title, abstract, author, and keywords. Structural metadata – metadata about containers of data and indicates how compound objects are put together, for example, how pages are ordered to form chapters. It describes the types, versions, relationships, and other characteristics of digital materials. Administrative metadata – the information to help manage a resource, like resource type, and permissions, and when and how it was created. Reference metadata – the information about the contents and quality of statistical data. Statistical metadata – also called process data, may describe processes that collect, process, or produce statistical data. Legal metadata – provides information about the creator, copyright holder, and public licensing, if provided. Metadata is not strictly bound to one of these categories, as it can describe a piece of data in many other ways. While the metadata application is manifold, covering a large variety of fields, there are specialized and well-accepted models to specify types of metadata. Bretherton & Singley (1994) distinguish between two distinct classes: structural/control metadata and guide metadata. Structural metadata describes the structure of database objects such as tables, columns, keys and indexes. Guide metadata helps humans find specific items and is usually expressed as a set of keywords in a natural language. According to Ralph Kimball, metadata can be divided into three categories: technical metadata (or internal metadata), business metadata (or external metadata), and process metadata. Dan Linstedt, creator of the data vault methodology, says business metadata "...provide[s] definition of the functionality, definition of the data, definition of the elements, and definition of how the data is used within business...business metadata includes business requirements, time-lines, business metrics, business process flows, and business terminology." Business metadata is important because it can greatly facilitate the usefulness of the data to business people. A simple example of business metadata is a glossary entry. Hover functionality in an application or web form can enable a glossary definition to be shown when cursor is on a field or term. Other examples of business metadata include annotation ability within applications. For example, a business user may be viewing a business intelligence (BI) report and notice a trend in the data. The user may have background knowledge as to why this trend occurs. Some business intelligence tools enable the user to create an annotation within the report that explains the trend. Such an annotation can enhance other users' understanding of the data. This example is especially powerful because it is created by a business user for the use of other business people. NISO distinguishes three types of metadata: descriptive, structural, and administrative. Descriptive metadata is typically used for discovery and identification, as information to search and locate an object, such as title, authors, subjects, keywords, and publisher. Structural metadata describes how the components of an object are organized. An example of structural metadata would be how pages are ordered to form chapters of a book. Finally, administrative metadata gives information to help manage the source. Administrative metadata refers to the technical information, such as file type, or when and how the file was created. Two sub-types of administrative metadata are rights management metadata and preservation metadata. Rights management metadata explains intellectual property rights, while preservation metadata contains information to preserve and save a resource. Statistical data repositories have their own requirements for metadata in order to describe not only the source and quality of the data but also what statistical processes were used to create the data, which is of particular importance to the statistical community in order to both validate and improve the process of statistical data production. An additional type of metadata beginning to be more developed is accessibility metadata. Accessibility metadata is not a new concept to libraries; however, advances in universal design have raised its profile. Projects like Cloud4All and GPII identified the lack of common terminologies and models to describe the needs and preferences of users and information that fits those needs as a major gap in providing universal access solutions. Those types of information are accessibility metadata. The Schema.org website has incorporated several accessibility properties based on IMS Global Access for All Information Model Data Element Specification. While the efforts to describe and standardize the varied accessibility needs of information seekers are beginning to become more robust, their adoption into established metadata schemas has not been as developed. For example, while Dublin Core (DC)'s "audience" and MARC 21's "reading level" could be used to identify resources suitable for users with dyslexia and DC's "format" could be used to identify resources available in braille, audio, or large print formats, there is more work to be done. == History == Metadata was traditionally used in the card catalogs of libraries until the 1980s when libraries converted their catalog data to digital databases. In the 2000s, as data and information were increasingly stored digitally, this digital data was described using metadata standards. An early description of "meta data" for computer systems was written by David Griffel and Stuart McIntosh at the MIT Center for International Studies in 1967: "In summary then, we have statements in an object language about subject descriptions of data and token codes for the data. We also have statements in a meta language describing the data relationships and transformations, and ought/is relations between norm and data." == Definition == Metadata means "data about data". Metadata is defined as the data providing information about one or more aspects of the data; it is used to summarize basic information about data that can make tracking and working with specific data easier. Some examples include: Means of creation of the data Source of the data Time and date of creation Creator or author of the data Location on a computer network where the data was created Standards used Data quality For example, a digital image may include metadata that describes the size of the image, its color depth, resolution,
DONE
The Data-based Online Nonlinear Extremumseeker (DONE) algorithm is a black-box optimization algorithm. DONE models the unknown cost function and attempts to find an optimum of the underlying function. The DONE algorithm is suitable for optimizing costly and noisy functions and does not require derivatives. An advantage of DONE over similar algorithms, such as Bayesian optimization, is that the computational cost per iteration is independent of the number of function evaluations. == Methods == The DONE algorithm was first proposed by Hans Verstraete and Sander Wahls in 2015. The algorithm fits a surrogate model based on random Fourier features and then uses a well-known L-BFGS algorithm to find an optimum of the surrogate model. == Applications == DONE was first demonstrated for maximizing the signal in optical coherence tomography measurements, but has since then been applied to various other applications. For example, it was used to help extending the field of view in light sheet fluorescence microscopy.
BioCreative
BioCreAtIvE (A critical assessment of text mining methods in molecular biology) consists in a community-wide effort for evaluating information extraction and text mining developments in the biological domain. It was preceded by the Knowledge Discovery and Data Mining (KDD) Challenge Cup for detection of gene mentions. == Community Challenges == === First edition (2004-2005) === Three main tasks were posed at the first BioCreAtIvE challenge: the entity extraction task, the gene name normalization task, and the functional annotation of gene products task. The data sets produced by this contest serve as a Gold Standard training and test set to evaluate and train Bio-NER tools and annotation extraction tools. === Second edition (2006-2007) === The second BioCreAtIvE challenge (2006-2007) had also 3 tasks: detection of gene mentions, extraction of unique idenfiers for genes and extraction information related to physical protein-protein interactions. It counted with participation of 44 teams from 13 countries. === Third edition (2011-2012) === The third edition of BioCreative included for the first time the InterActive Task (IAT), designed to evaluate the practical usability of text mining tools in real-world biocuration tasks. === Fifth edition (2016) === BioCreative V had 5 different tracks, including an interactive task (IAT) for usability of text mining systems and a track using the BioC format for curating information for BioGRID.
Automation
Automation describes a wide range of technologies that reduce human intervention in processes, mainly by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines. Automation has been achieved by various means including mechanical, hydraulic, pneumatic, electrical, electronic devices, and computers, usually in combination. Complicated systems, such as modern factories, airplanes, and ships typically use combinations of all of these techniques. The benefits of automation includes labor savings, reducing waste, savings in electricity costs, savings in material costs, and improvements to quality, accuracy, and precision. Automation includes the use of various equipment and control systems such as machinery, processes in factories, boilers, and heat-treating ovens, switching on telephone networks, steering, stabilization of ships, aircraft and other applications and vehicles with reduced human intervention. Examples range from a household thermostat controlling a boiler to a large industrial control system with tens of thousands of input measurements and output control signals. In the simplest type of an automatic control loop, a controller compares a measured value of a process with a desired set value and processes the resulting error signal to change some input to the process, in such a way that the process stays at its set point despite disturbances. This closed-loop control is an application of negative feedback to a system. The mathematical basis of control theory began in the 18th century and advanced rapidly in the 20th. The term automation, inspired by the earlier word automatic (coming from automaton), was not widely used before 1947, when Ford established an automation department. It was during this time that the industry was rapidly adopting feedback controllers, Technological advancements introduced in the 1930s revolutionized various industries significantly. The World Bank's World Development Report of 2019 shows evidence that the new industries and jobs in the technology sector outweigh the economic effects of workers being displaced by automation. Job losses and downward mobility blamed on automation have been cited as one of many factors in the resurgence of nationalist, protectionist and populist politics in the US, UK and France, among other countries since the 2010s. == History == === Early history === It was a preoccupation of the Greeks and Arabs (in the period between about 300 BC and about 1200 AD) to keep an accurate track of time. In Ptolemaic Egypt, about 270 BC, Ctesibius described a float regulator for a water clock, a device not unlike the ball and cock in a modern flush toilet. This was the earliest feedback-controlled mechanism. The appearance of the mechanical clock in the 14th century made the water clock and its feedback control system obsolete. The Persian Banū Mūsā brothers, in their Book of Ingenious Devices (850 AD), described a number of automatic controls. Two-step level controls for fluids, a form of discontinuous variable structure controls, were developed by the Banu Musa brothers. They also described a feedback controller. The design of feedback control systems up through the Industrial Revolution was by trial-and-error, together with a great deal of engineering intuition. It was not until the mid-19th century that the stability of feedback control systems was analyzed using mathematics, the formal language of automatic control theory. The centrifugal governor was invented by Christiaan Huygens in the seventeenth century, and used to adjust the gap between millstones. === Industrial Revolution in Western Europe === The introduction of prime movers, or self-driven machines advanced grain mills, furnaces, boilers, and the steam engine created a new requirement for automatic control systems including temperature regulators (invented in 1624; see Cornelius Drebbel), pressure regulators (1681), float regulators (1700) and speed control devices. Another control mechanism was used to tent the sails of windmills. It was patented by Edmund Lee in 1745. Also in 1745, Jacques de Vaucanson invented the first automated loom. Around 1800, Joseph Marie Jacquard created a punch-card system to program looms. In 1771 Richard Arkwright invented the first fully automated spinning mill driven by water power, known at the time as the water frame. An automatic flour mill was developed by Oliver Evans in 1785, making it the first completely automated industrial process. A centrifugal governor was used by Mr. Bunce of England in 1784 as part of a model steam crane. The centrifugal governor was adopted by James Watt for use on a steam engine in 1788 after Watt's partner Boulton saw one at a flour mill Boulton & Watt were building. The governor could not actually hold a set speed; the engine would assume a new constant speed in response to load changes. The governor was able to handle smaller variations such as those caused by fluctuating heat load to the boiler. Also, there was a tendency for oscillation whenever there was a speed change. As a consequence, engines equipped with this governor were not suitable for operations requiring constant speed, such as cotton spinning. Several improvements to the governor, plus improvements to valve cut-off timing on the steam engine, made the engine suitable for most industrial uses before the end of the 19th century. Advances in the steam engine stayed well ahead of science, both thermodynamics and control theory. The governor received relatively little scientific attention until James Clerk Maxwell published a paper that established the beginning of a theoretical basis for understanding control theory. === 20th century === Relay logic was introduced with factory electrification, which underwent rapid adaptation from 1900 through the 1920s. Central electric power stations were also undergoing rapid growth and the operation of new high-pressure boilers, steam turbines and electrical substations created a great demand for instruments and controls. Central control rooms became common in the 1920s, but as late as the early 1930s, most process controls were on-off. Operators typically monitored charts drawn by recorders that plotted data from instruments. To make corrections, operators manually opened or closed valves or turned switches on or off. Control rooms also used color-coded lights to send signals to workers in the plant to manually make certain changes. The development of the electronic amplifier during the 1920s, which was important for long-distance telephony, required a higher signal-to-noise ratio, which was solved by negative feedback noise cancellation. This and other telephony applications contributed to the control theory. In the 1940s and 1950s, German mathematician Irmgard Flügge-Lotz developed the theory of discontinuous automatic controls, which found military applications during the Second World War to fire control systems and aircraft navigation systems. Controllers, which were able to make calculated changes in response to deviations from a set point rather than on-off control, began being introduced in the 1930s. Controllers allowed manufacturing to continue showing productivity gains to offset the declining influence of factory electrification. Factory productivity was greatly increased by electrification in the 1920s. U.S. manufacturing productivity growth fell from 5.2%/yr 1919–29 to 2.76%/yr 1929–41. Alexander Field notes that spending on non-medical instruments increased significantly from 1929 to 1933 and remained strong thereafter. The First and Second World Wars saw major advancements in the field of mass communication and signal processing. Other key advances in automatic controls include differential equations, stability theory and system theory (1938), frequency domain analysis (1940), ship control (1950), and stochastic analysis (1941). Starting in 1958, various systems based on solid-state digital logic modules for hard-wired programmed logic controllers (the predecessors of programmable logic controllers [PLC]) emerged to replace electro-mechanical relay logic in industrial control systems for process control and automation, including early Telefunken/AEG Logistat, Siemens Simatic, Philips/Mullard/Valvo Norbit, BBC Sigmatronic, ACEC Logacec, Akkord Estacord, Krone Mibakron, Bistat, Datapac, Norlog, SSR, or Procontic systems. In 1959 Texaco's Port Arthur Refinery became the first chemical plant to use digital control. Conversion of factories to digital control began to spread rapidly in the 1970s as the price of computer hardware fell. === Significant applications === The automatic telephone switchboard was introduced in 1892 along with dial telephones. By 1929, 31.9% of the Bell system was automatic. Automatic telephone switching originally used vacuum tube amplifiers and electro-mechanical switches, which consumed a large amount of electricity. Call volume eve
NoSQL
NoSQL (originally meaning "not only SQL" or "non-relational") refers to a type of database design that stores and retrieves data differently from the traditional table-based structure of relational databases. Unlike relational databases, which organize data into rows and columns like a spreadsheet, NoSQL databases use a single data structure—such as key–value pairs, wide columns, graphs, or documents—to hold information. Since this non-relational design does not require a fixed schema, it scales easily to manage large, often unstructured datasets. NoSQL systems are sometimes called "Not only SQL" because they can support SQL-like query languages or work alongside SQL databases in polyglot-persistent setups, where multiple database types are combined. Non-relational databases date back to the late 1960s, but the term "NoSQL" emerged in the early 2000s, spurred by the needs of Web 2.0 companies like social media platforms. NoSQL databases are popular in big data and real-time web applications due to their simple design, ability to scale across clusters of machines (called horizontal scaling), and precise control over data availability. These structures can speed up certain tasks and are often considered more adaptable than fixed database tables. However, many NoSQL systems prioritize speed and availability over strict consistency (per the CAP theorem), using eventual consistency—where updates reach all nodes eventually, typically within milliseconds, but may cause brief delays in accessing the latest data, known as stale reads. While most lack full ACID transaction support, some, like MongoDB, include it as a key feature. == Barriers to adoption == Barriers to wider NoSQL adoption include their use of low-level query languages instead of SQL, inability to perform ad hoc joins across tables, lack of standardized interfaces, and significant investments already made in relational databases. Some NoSQL systems risk losing data through lost writes or other forms, though features like write-ahead logging—a method to record changes before they’re applied—can help prevent this. For distributed transaction processing across multiple databases, keeping data consistent is a challenge for both NoSQL and relational systems, as relational databases cannot enforce rules linking separate databases, and few systems support both ACID transactions and X/Open XA standards for managing distributed updates. Limitations within the interface environment are overcome using semantic virtualization protocols, such that NoSQL services are accessible to most operating systems. == History == The term NoSQL was used by Carlo Strozzi in 1998 to name his lightweight Strozzi NoSQL open-source relational database that did not expose the standard Structured Query Language (SQL) interface, but was still relational. His NoSQL RDBMS is distinct from the around-2009 general concept of NoSQL databases. Strozzi suggests that, because the current NoSQL movement "departs from the relational model altogether, it should therefore have been called more appropriately 'NoREL'", referring to "not relational". Johan Oskarsson, then a developer at Last.fm, reintroduced the term NoSQL in early 2009 when he organized an event to discuss "open-source distributed, non-relational databases". The name attempted to label the emergence of an increasing number of non-relational, distributed data stores, including open source clones of Google's Bigtable/MapReduce and Amazon's DynamoDB. == Types and examples == There are various ways to classify NoSQL databases, with different categories and subcategories, some of which overlap. What follows is a non-exhaustive classification by data model, with examples: === Key–value store === Key–value (KV) stores use the associative array (also called a map or dictionary) as their fundamental data model. In this model, data is represented as a collection of key–value pairs, such that each possible key appears at most once in the collection. The key–value model is one of the simplest non-trivial data models, and richer data models are often implemented as an extension of it. The key–value model can be extended to a discretely ordered model that maintains keys in lexicographic order. This extension is computationally powerful, in that it can efficiently retrieve selective key ranges. Key–value stores can use consistency models ranging from eventual consistency to serializability. Some databases support ordering of keys. There are various hardware implementations, and some users store data in memory (RAM), while others on solid-state drives (SSD) or rotating disks (aka hard disk drive (HDD)). === Document store === The central concept of a document store is that of a "document". While the details of this definition differ among document-oriented databases, they all assume that documents encapsulate and encode data (or information) in some standard formats or encodings. Encodings in use include XML, YAML, and JSON and binary forms like BSON. Documents are addressed in the database via a unique key that represents that document. Another defining characteristic of a document-oriented database is an API or query language to retrieve documents based on their contents. Different implementations offer different ways of organizing and/or grouping documents: Collections Tags Non-visible metadata Directory hierarchies Compared to relational databases, collections could be considered analogous to tables and documents analogous to records. But they are different – every record in a table has the same sequence of fields, while documents in a collection may have fields that are completely different. === Graph === Graph databases are designed for data whose relations are well represented as a graph consisting of elements connected by a finite number of relations. Examples of data include social relations, public transport links, road maps, network topologies, etc. Graph databases and their query language == Performance == The performance of NoSQL databases is usually evaluated using the metric of throughput, which is measured as operations per second. Performance evaluation must pay attention to the right benchmarks such as production configurations, parameters of the databases, anticipated data volume, and concurrent user workloads. Ben Scofield rated different categories of NoSQL databases as follows: Performance and scalability comparisons are most commonly done using the YCSB benchmark. == Handling relational data == Since most NoSQL databases lack ability for joins in queries, the database schema generally needs to be designed differently. There are three main techniques for handling relational data in a NoSQL database. (See table join and ACID support for NoSQL databases that support joins.) === Multiple queries === Instead of retrieving all the data with one query, it is common to do several queries to get the desired data. NoSQL queries are often faster than traditional SQL queries, so the cost of additional queries may be acceptable. If an excessive number of queries would be necessary, one of the other two approaches is more appropriate. === Caching, replication and non-normalized data === Instead of only storing foreign keys, it is common to store actual foreign values along with the model's data. For example, each blog comment might include the username in addition to a user id, thus providing easy access to the username without requiring another lookup. When a username changes, however, this will now need to be changed in many places in the database. Thus this approach works better when reads are much more common than writes. === Nesting data === With document databases like MongoDB it is common to put more data in a smaller number of collections. For example, in a blogging application, one might choose to store comments within the blog post document, so that with a single retrieval one gets all the comments. Thus in this approach a single document contains all the data needed for a specific task. == ACID and join support == A database is marked as supporting ACID properties (atomicity, consistency, isolation, durability) or join operations if the documentation for the database makes that claim. However, this doesn't necessarily mean that the capability is fully supported in a manner similar to most SQL databases. == Query optimization and indexing in NoSQL databases == Different NoSQL databases, such as DynamoDB, MongoDB, Cassandra, Couchbase, HBase, and Redis, exhibit varying behaviors when querying non-indexed fields. Many perform full-table or collection scans for such queries, applying filtering operations after retrieving data. However, modern NoSQL databases often incorporate advanced features to optimize query performance. For example, MongoDB supports compound indexes and query-optimization strategies, Cassandra offers secondary indexes and materialized views, and Redis employs custom indexing mechanisms tailored to specific use cases. Systems like El